Business License
Contact Us
Your inquiry content must be between 10 to 5000 characters
Please enter Your valid email address
Precautions and temperature settings for purchasing blackbody radiation sources
I. Unpacking the Blackbody Radiation Sources
Carefully inspect the surface of the blackbody radiation sources upon unpacking, as damage may have occurred during transportation. If there is any shipping damage, notify the carrier.
Confirm that the following components are present: infrared calibration source (blackbody furnace), power cord, and user guide.
II. Placement
1. The blackbody radiation source must be placed on a flat surface, with at least 8 inches of free space around the calibration instrument. (Note: One model of this calibration standard has two power supplies: 220V/AC and 110V/AC. Please ensure the power rating is suitable for the instrument.)
2. Turn on the power switch on the calibration power supply. The fan should start quietly, and after the instrument and controller display light up for 3 seconds, the controller will operate normally after a brief self-test. If the operation fails, please check the power connection.
3. The heater will start operating, calibrating to the preset temperature, and the display will begin to show the actual target temperature.
III. The procedure for setting the temperature is as follows
1. Press the "ON" button to turn on the instrument. The display screen will light up, indicating that it is ready for operation.
2. Set the temperature according to the product manual. This generally varies depending on whether it's a standard model (with a smart touchscreen) or a portable model (with buttons). The LED display will show the actual set temperature.
3. It may take 10 to 20 minutes or more for the actual temperature to stabilize after setting. The device's stabilization time can be obtained by contacting the manufacturer.
Recently Posted
-
Principles of Blackbody Radiation Sources
April 14, 2026Principles of Blackbody Radiation SourcesAll objects emit electromagnetic radiation within a specific range of wavelengths. Radiat
Read More -
Method for Calibrating Thermocouples Using a Dry-Block Calibrator
April 8, 2026Method for Calibrating Thermocouples Using a Dry-Block CalibratorDuring operation, the hot junction of a thermocouple is subject t
Read More -
Basic principles and temperature measurement errors of resistance temperature detectors (RTDs)
March 12, 2026Resistance temperature detectors (RTDs) are commonly used temperature sensing elements in the medium and low temperature range. Th
Read More -
The main differences between metrological calibration and verification
March 12, 2026ISO 10012—1, "Quality assurance requirements for metrological testing equipment," defines "calibration" as: &q
Read More
Contact Us
Recommended Products
-
DY-XJY01B Portable Multi-Channel Temperature and Humidity Field Testing SystemNegotiableMOQ: 1 Set -
DY-JDL600 Thermocouple Calibration Furnace(300-1200c)NegotiableMOQ: 1 Piece
-
DY-JDL Horizontal Laboratory Temperature CalibrationNegotiableMOQ: 1 Piece
-
Portable Multi-Channel Temperature and Humidity Field Testing SystemNegotiableMOQ: 1 Set
-
Portable Multi-Channel Temperature and Humidity Field Testing SystemNegotiableMOQ: 1 Set
-
DY-JDL Laboratory Temperature Calibration / Thermocouple Calibration FurnaceNegotiableMOQ: 1 Piece
-
DY-HT2M-150 Medium Temperature Surface Source Blackbody Furnace, Radiation Surface 150mm (room Temperature +5-500℃)NegotiableMOQ: 1 Piece
-
DY-HT1 Cavity Blackbody Radiation SourceNegotiableMOQ: 1 Set
-
DY-HT1M-150 Low Temperature Surface Source Black Body Furnace, Radiation Surface 150mm (-20-100℃)Infrared Thermometer Calibration InstrumentNegotiableMOQ: 1 Piece
-
DY-GTLB Transformer Oil Level Thermometer Detection Device (-20℃-150℃)NegotiableMOQ: 1 Piece
-
DY-HT4-1 Blackbody Furnace/blackbody Radiation Source (800℃-1450℃)NegotiableMOQ: 1 Piece
-
DY-HT70MD Portable Intelligent Multi-faceted Blackbody Furnace (room Temperature +5°C~150℃)NegotiableMOQ: 1 Piece
-
DY-HT50M Portable Blackbody Furnace, Radiation Surface 50mm (room Temperature +5℃-500℃)/Infrared Thermometer Calibration InstrumentNegotiableMOQ: 1 Piece
-
DY-JDL Thermocouple Calibration FurnaceNegotiableMOQ: 1 Piece
-
DY-JDL Laboratory Temperature Calibration Base Metal Thermocouple Calibration Furnace (300-1200c)NegotiableMOQ: 1 Piece
-
Thermocouple Cleaning and Annealing DeviceNegotiableMOQ: 1 Piece
-
Rapid Heating Blackbody Radiation Sources of Radiation Thermometry/ Standard Blackbody Stove(300-1200c)NegotiableMOQ: 1 Piece
-
High Precision Dry Block Temperature Calibrator/Dry Block Calibrator Definition（50-600c）NegotiableMOQ: 1 Piece
-
Thermocouple Annealing FurnaceNegotiableMOQ: 1 Piece
-
Rapid Heating Intelligent Dry Block Temperature Calibrator -120~40°CNegotiableMOQ: 1 Piece
